1700V Si-IGBT and SiC-SBD hybrid module for AC690V inverter system
2014
The 1700V/400A
hybrid
moduleis consisted of Si-IGBTs and SiC-
SBDsmounted in a general 2in1 package. Because the reverse recovery current of SiC-
SBDis very small to be an unipolar device, reverse recovery and turn-on losses at 400A on the
hybrid
moduleare 83% and 38% lower than that of the conventional all Si
module, respectively. Therefore there is a further advantage of
hybrid
moduleat high frequency operation. Radiation noise on
hybrid
modulebecomes higher with increasing collector current, but the peak value of the noise from
hybrid
moduleis almost same as the all Si
moduleif the collector current is less than 300A. In AC690V PWM inverter, the total power dissipation of
hybrid
moduleis 8% lower at 1 kHz and 29% lower at 10 kHz compare to the all Si
module. Therefore the 1700V
hybrid
moduleis useful as a
power modulefor an AC690V high efficiency inverter system such as wind power
generation systemand high voltage solar power
generation system. This paper reports about the static and dynamic characteristics and the radiation noise measurement results on the 400A/1700V
hybrid
module.
Keywords:
-
Correction
-
Source
-
Cite
-
Save
5
References
1
Citations
NaN
KQI