The ATLAS tile calorimeter ROD injector and multiplexer board
2011
Abstract The ATLAS Tile
Calorimeteris a sampling detector composed by cells made of iron-scintillator tiles. The
calorimetercell signals are digitized in the front-end electronics and transmitted to the Read-Out Drivers (
RODs) at the first level trigger rate. The
RODreceives triggered data from up to 9856 channels and provides the energy, phase and quality factor of the signals to the second level trigger. The back-end electronics is divided into four partitions containing eight
RODseach. Therefore, a total of 32
RODsare used to process and transmit the data of the TileCal detector. In order to emulate the detector signals in the production and commissioning of
RODmodules a board called
RODInjector and Multiplexer Board (RIMBO) was designed. In this paper, the RIMBO main functional blocks, PCB design and the different operation modes are described. It is described the crucial role of the board within the TileCal
ROD
test-benchin order to emulate the front-end electronics during the validation of
RODboards as well as during the evaluation of the
ROD
signal reconstructionalgorithms. Finally, qualification and performance results for the injection operation mode obtained during the Tile
Calorimeter
ROD
production testsare presented.
Keywords:
-
Correction
-
Source
-
Cite
-
Save
3
References
0
Citations
NaN
KQI