14C release from steels under aerobic conditions

Radiocarbon ( 14 C) is a key radionuclide in the assessment of the safety of underground geological disposal facilities for radioactive wastes, and the understanding of the 14 C behavior in stainless steel may lead to a re-evaluation of the near-surface repository for the disposal of wastes containing this radionuclide in high concentrations. To achieve this objective, leaching experiments were planned for two different scenarios. The first is where the leaching solution, NaOH solution of pH ca. 12 in aerobic conditions, simulates the expected conditions in a cement-based near-surface repository over long time periods. The other one uses an acid solution of 1M H 3 PO 4 , which has been proved as a high efficiency chemical removal agent of 14 C in graphite. The development of both analytical methods and protocols to measure the release of 14 C from the activated steel samples and the speciation in the aqueous and gaseous phase has been undertaken as part of the EC CAST ( CArbon-14Source Term) project. Analytical methods, suitable for identifying and quantifying low molecular weight organic molecules, comprise ion chromatography(IC) and gas chromatography coupled to mass spectrometry (GC-MS); they are described for aqueous and gaseous samples, respectively. In this paper the preparation of leaching experiments to measure the release of 14 C and the results obtained are described.