Single Wall Carbon Nanotubes/Polypyrrole Composite Thin Film Electrodes: Investigation of Interfacial Ion Exchange Behavior

Single-wall carbon nanotubes/polypyrrole (SWCNT/PPy) composite thin-film electrodes were prepared by electrodeposition of the pyrrole monomer on a porous network made of SWCNT bundles. Electrode/electrolyte interface, which is intimately related to the pseudocapacitive charge storage behavior, is investigated by using coupled electrogravimetric methods (electrochemical quartz crystal microbalance (EQCM) and its coupling with electrochemical impedance spectroscopy, Ac-electrogravimetry), in a 0.5 M NaCl electrolyte (pH = 7). Our results show that the range of usable potential is greater for composite SWCNT/PPy films than for SWCNT films, which should allow a higher storage capacity to be obtained. This effect is also confirmed by mass variation measurements via EQCM. The mass change (corresponding to the amount of (co)electroadsorbed species) obtained with composite SWCNT/PPy films is four times greater than that observed for pristine SWCNT films if the same potential range is examined. The permselectivity is also greatly improved in the case of composite SWCNT/PPy films compared to SWCNT films; the former shows mainly cation exchange preference. The quantities of anions estimated by Ac-electrogravimetric measurements are much lower in the case of composites. This corroborates the better permselectivity of these composite SWCNT/PPy films even with a moderate amount of PPy.