Pelletized adsorbent of alum sludge and bentonite for removal of arsenic.

Abstract Powder adsorbents show an excellent adsorption capacity for arsenic(As) due to the large specific surface area. However, the performance of powder adsorbents decreases significantly by channeling in the adsorption bed, and the powder is released from the bed. Pelletization of power adsorbent can solve the problems, and bentonite was proposed as a binder to improve the strength. The adsorption capacity and lifetime of pelletized adsorbent were evaluated through a batch and column study. The addition of bentonite decreased adsorption capacity by 16 % of pellet without bentonite, but improved compressive strength of adsorbent up to 3.6 times. In the batch test, the maximum adsorption capacity of pelletized adsorbent is 22.2 mg As/g, which is about 40% of powder adsorbent. However, in the column study, pellet adsorbent showed similar adsorption performance and lifetime to commercial and powder adsorbent. As a result, the pellet adsorbent using bentonite is a potential low-cost adsorbent to remove effectively As in the aqueous phase.