Distribution Network Grid Planning and Automatic Routing Based on Cluster Analysis Algorithm

In order to improve the efficiency of power grid enterprises under the background of new power reform, the author proposes a set of planning ideas and methods for medium-voltage distribution networks based on the optimal division of power supply grids. First, the layout of the main channel in the planning area should be determined to ensure the reservation of land resources. Then, on the basis of clarifying the purpose and principle of grid division, based on the selection of the nearest load backup substation and the load clustering method, the optimal division of the power supply grid should be realized on a global scale. Finally, in each power supply grid, the wiring mode and the primary and secondary construction and renovation standards are selected based on the classification of the supply area, and the main line wiring planning is carried out. For the grid frame in the transition year, in order to avoid repeated reconstruction and facilitate construction, the principle of piece-by-piece construction and reconstruction is proposed. The results show that by the target year, each power supply grid in the planning area will use two substations as power points, the power supply range of the main lines of each grid is limited to this grid, the lines between grids will not be connected, and the line connection rate will reach 100% and all meet the N-1 check. The proposed method follows the basic planning concept of “technically feasible and economically optimal” on the basis of overall planning and transforms the complex global planning of distribution network into local planning within each optimized grid, and it enables different planners to obtain a basically consistent grid optimization scheme, strengthens the scientificity and certainty of planning, and provides a reference for the revision and refinement of relevant guidelines, which has been practically applied.