代表性论文专著
英文论文
[1] Qin C, Tao J, Xiao D, et al. Accurate and efficient stability prediction for milling operations using the Legendre-Chebyshev-based method[J]. International Journal of Advanced Manufacturing Technology, 2020, 107(1-2): 247-258.
[2] Qin Chengjin, Tao Jianfeng*, Shi Haotian, Xiao Dengyu, Li Bingchu, Liu Chengliang. A novel Chebyshev-wavelet-based approach for accurate and fast prediction of milling stability. Precision Engineering, 2020, 62:244–255
[3] Zhu Y, Zhang Q, Tao J, et al. Heat Characteristics Analysis of Electro-Hydraulic Servo Valve[J]. Journal of Thermal Science and Engineering Applications, 2019, 11(3).
[4] Tao J, Zeng H, Qin C, et al. Chatter detection in robotic drilling operations combining multi-synchrosqueezing transform and energy entropy[J]. International Journal of Advanced Manufacturing Technology, 2019, 105(7-8): 2879-2890.
[5] Tao J, Qin C, Xiao D, et al. A pre-generated matrix-based method for real-time robotic drilling chatter monitoring[J]. Chinese Journal of Aeronautics, 2019, 32(12): 2755-2764.
[6] Tao J, Qin C, Xiao D, et al. Timely chatter identification for robotic drilling using a local maximum synchrosqueezing-based method[J]. Journal of Intelligent Manufacturing, 2019.
[7] Tao J, Qin C, Liu C. A synchroextracting-based method for early chatter identification of robotic drilling process[J]. International Journal of Advanced Manufacturing Technology, 2019, 100(1-4): 273-285.
[8] Tao J, Qin C, Li W, et al. Intelligent Fault Diagnosis of Diesel Engines via Extreme Gradient Boosting and High-Accuracy Time-Frequency Information of Vibration Signals[J]. Sensors, 2019, 19(15).
[9] Tao J, Lei J, Liu C, et al. Nonlinear Static and Dynamic Stiffness Characteristics of Support Hydraulic System of TBM[J]. Chinese Journal of Mechanical Engineering, 2019, 32(1).
[10] Qin C, Tao J, Liu C. A novel stability prediction method for milling operations using the holistic-interpolation scheme[J]. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2019, 233(13): 4463-4475.
[11] Ling X, Tao J, Li B, et al. A Multi-Physics Modeling-Based Vibration Prediction Method for Switched Reluctance Motors[J]. Applied Sciences-Basel, 2019, 9(21).
[12] Li L, Huang Y, Tao J, et al. Internal leakage identification of hydraulic cylinder based on intrinsic mode functions with random forest[J]. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2019, 233(15): 5532-5544.
[13] Yu H, Li L, Zhao Y, et al. Fretting Damage of Copper Sleeve Gasket in Gripper Cylinder of TBM Excavating in Complex Geological Structures[J]. Journal of Mechanical Engineering, 2018, 54(1): 74-81.
[14] Qin C, Tao J, Liu C. A predictor-corrector-based holistic-discretization method for accurate and efficient milling stability analysis[J]. International Journal of Advanced Manufacturing Technology, 2018, 96(5-8): 2043-2054.
[15] Li L, Huang Y, Tao J, et al. Featured temporal segmentation method and AdaBoost-BP detector for internal leakage evaluation of a hydraulic cylinder[J]. Measurement, 2018, 130: 279-289.
[16] Lei J, Tao J, Liu C, et al. Flow model and dynamic characteristics of a direct spring loaded poppet relief valve[J]. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2018, 232(9): 1657-1664.
[17] Guo J, Tao J, Li L, et al.: DIAGNOSIS METHOD FOR VALVE-CONTROLLED HYDRAULIC CYLINDER LEAKAGE BASED ON SUBSPACE IDENTIFICATION, Proceedings of the Bath/Asme Symposium on Fluid Power and Motion Control, 2018, 2018.
[18] Tao J, Qin C, Liu C. Milling Stability Prediction with Multiple Delays via the Extended Adams-Moulton-Based Method[J]. Mathematical Problems in Engineering, 2017.
[19] Qin C, Tao J, Liu C. Stability analysis for milling operations using an Adams-Simpson-based method[J]. International Journal of Advanced Manufacturing Technology, 2017, 92(1-4): 969-979.
[20] Qin C, Tao J, Li L, et al. An Adams-Moulton-based method for stability prediction of milling processes[J]. International Journal of Advanced Manufacturing Technology, 2017, 89(9-12): 3049-3058.
[21] Li L, Tao J-F, Yu H-D, et al. Online Condition Monitoring of Gripper Cylinder in TBM Based on EMD Method[J]. Chinese Journal of Mechanical Engineering, 2017, 30(6): 1325-1337.
[22] Du W, Guo Z, Gong X, et al. Multifractal characterization of mechanical vibration signals through improved empirical mode decomposition-based detrended fluctuation analysis[J]. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2017, 231(22): 4139-4149.
[23] Zou X, Mi Y, Zheng H, et al. Influence of Vibration on the Performance of Tunnel Boring Machines[M]. 2016.
[24] Wu Y, Tao J, Liu C, et al. Modeling on stiffness of gripper in hardrock TBM[M]. 2016.
[25] Tao J, Wang X, Xiong Z, et al. Modelling and Simulation of Unidirectional Proportional Pump-Controlled Asymmetric Cylinder Position Control System with Model Predictive Control Algorithm[M]. 2016: 408-413.
[26] Tao J, He X, Yang H, et al. Stability Analysis of Pump-controlled Dual-winch System with PI Controller[M]. 2016: 373-377.
[27] Tao J, Guo J, Liu C, et al. A Review of Powered Wheel for Aircraft[M]. 2016: 378-383.
[28] Qin C, Tao J, Wang M, et al. A Novel Approach for the Acquisition of Vibration Signals of the End Effector in Robotic Drilling[M]. 2016: 522-526.
[29] Ma Q, Wang X, Yuan F, et al. Research on feed-forward PIDD2 control for hydraulic continuous rotation motor electro-hydraulic servo system with long pipeline[M]. 2016: 6 pp.-6 pp.
[30] Ma Q, Wang X, Yuan F, et al. Effects of the friction coefficient on the torque characteristics of a hydraulic cam-rotor vane motor[J]. Journal of Mechanical Science and Technology, 2016, 30(8): 3507-3514.
[31] Li L, Zhang F, Tao J, et al. Analysis for Fracture of O-ring in Hang Hydraulic Cylinder of TBM Based on Fracture Mechanics[J]. China Mechanical Engineering, 2016, 27(12): 1563-7.
[32] Lei J, Tao J, Liu C, et al. Internal Leakage Characteristics of Gripper Cylinder of TBM[M]. 2016.
[33] Du W-L, Tao J-F, Gong X-Y, et al. Dual-tree complex wavelet transform based multifractal detrended fluctuation analysis for nonstationary time series[J]. Acta Physica Sinica, 2016, 65(9).
[34] Du W, Gong X, Li A, et al. Multifractal characterization of plunger pump vibration signal through improved empirical mode decomposition based detrended fluctuation analysis[M]. 2016: 757-761.
[35] Yuan F, Wang X, Tao J, et al. Research on Zero-finding Method for the Incremental Encoder of Hydraulic Position Servo Motor[M]. 2015: 803-808.
[36] Wu Y, Tao J, Liu C, et al. Stiffness Modeling of Thrust Cylinder in Hardrock Tunnel Boring Machine[M]. 2015: 157-162.
[37] Du W, Tao J, Li Y, et al. Wavelet leaders multifractal features based fault diagnosis of rotating mechanism[J]. Mechanical Systems and Signal Processing, 2014, 43(1-2): 57-75.
---------------------------------------------------------------------------------------
中文论文
[1]徐川辉,王旭永,陶建峰,张文俊,苗中华.叶片马达凸轮转子过渡曲线特性分析[J].开云网页登录
学报,2014,(1): 1-5,11
[2]徐川辉,吴亦昕,王旭永,陶建峰,张文俊,苗中华.凸轮转子叶片马达干扰力矩分析与实验研究[J].开云网页登录
学报,2014,(3): 430-433,444
[3]陶建峰,覃程锦,黄德中,顾建江.类矩形盾构单机械臂管片拼装机静态误差计算[J].现代隧道技术,2016,: 60-68
[4]王玄,陶建峰,张峰榕,吴亚瑾,刘成良.泵控非对称液压缸系统高精度位置控制方法[J].浙江大学学报(工学版),2016,第50卷(4): 597-602
[5]袁璠,王旭永,张文俊,陶建峰,苗中华.凸轮转子叶片马达的过渡曲线中心角参数优化[J].开云网页登录
学报,2016,(5): 680-685,695
[6]王玄,陶建峰,张峰榕,吴亚瑾,刘成良.基于预测控制的单向比例泵控非对称液压缸系统控制方法[J].开云网页登录
学报,2016,(5): 696-701
[7]陶建峰,朱瑶宏,覃程锦,庄欠伟.类矩形隧道单机械臂管片拼装机运动学逆解[J].开云网页登录
学报,2016,第50卷(9): 1473-1479
[8]陈明惠,李昊,范云平,张浩,陶建峰,郑刚.影响扫频激光光源瞬时线宽因素的研究[J].光学学报,2016,第36卷(11): 205-210
[9]王明斗,陶建峰,覃程锦,刘成良.空间余量最优的拼装机轨迹规划[J].浙江大学学报(工学版),2017,第51卷(3): 453-460
[10]熊志林,陶建峰,张峰榕,刘成良.采用状态估计的泵控非对称液压缸模型预测控制[J].西安交通大学学报,2017,第51卷(4): 109-115
[11]李琳,余海东,陶建峰,刘成良.变刚度条件下隧道掘进机撑靴液压缸的动态特性[J].开云网页登录
学报,2017,第51卷(9): 1058-1064
[12]熊志林,陶建峰,刘成良.改进末端跟随运动的超冗余蛇形臂机器人运动学逆解[J].机器人,2018,(1): 37-45
[13]唐小涛,陶建峰,李志腾,李彦明,刘成良.自动导航插秧机路径跟踪系统稳定性模糊控制优化方法[J].农业机械学报,2018,第49卷(1): 29-34
[14]朱彦楠,张强,陈立峰,陶建峰,王旭永.基于效率分析的凸轮转子叶片马达液膜厚度设计[J].开云网页登录
学报,2018,(6): 715-721
[15]张雁,李彦明,刘翔鹏,陶建峰,刘成良,李瑞川.水稻直播机自动驾驶模糊自适应控制方法[J].农业机械学报,2018,第49卷(10): 30-37
[16]张雁,李彦明,刘翔鹏,陶建峰,刘成良,李瑞川.水田环境下水稻直播机自动驾驶控制方法[J].农业机械学报,2018,第49卷(11): 15-22
[17]李卫星,陶建峰,覃程锦,刘成良.同步压缩小波与极限梯度提升树融合的柴油机失火故障诊断[J].西安交通大学学报,2019,第53卷(2): 47-54,169
[18]张强,朱彦楠,陶建峰,王旭永.基于热特性的凸轮转子叶片马达密封间隙优化[J].开云网页登录
学报,2019,第53卷(6): 647-653
[19]齐文超,李彦明,陶建峰,覃程锦,刘成良,种昆.丘陵山地拖拉机姿态主动调整系统设计与实验[J].农业机械学报,2019,第50卷(7): 381-388
[20]杨刚,雷军波,刘成良,陶建峰.基于线结构光源和机器视觉的高精度谷物测产系统研制[J].农业工程学报,2019,第35卷(8): 21-28
[21]张康,陶建峰,覃程锦,李卫星,刘成良.随机丢弃和批标准化的深度卷积神经网络柴油机失火故障诊断[J].西安交通大学学报,2019,(8): 159-166
[22]薛雷,曾宏伟,覃程锦,陶建峰,刘成良,汤海洋,黄稳.采用同步压缩变换和能量熵的机器人加工颤振监测方法[J].西安交通大学学报,2019,(8): 24-30,89
[23]段贤强,陶建峰,覃程锦,蔡道清,李彦明,刘成良.变速条件下农业机械路径跟踪稳定控制方法[J].农业机械学报,2019,第50卷(9): 18-24,32
[24]张伟,杨刚,雷军波,刘成良,陶建峰,覃程锦.基于微波反射法的谷物含水率在线检测装置研制[J].农业工程学报,2019,(23): 21-28
[25]杨泰春,陶建峰,覃程锦,刘成良.采用支持向量机的非对称阀控液压缸模型预测控制[J].西安交通大学学报,2020,(1): 93-100,107
[26]谭顿,陶建峰,陈良深,王旭永.叶片摩擦系数对液压凸轮转子伺服马达转矩性能影响[J].开云网页登录
学报,2020,(2): 160-166