代表性论文专著
-Ji Li, Jingtian Guan, Hui Du, and Juntong Xi,Error self-correction method for phase jump in multi-frequency phase-shifting structured light,Applied Optics,60(4): 949-958
-Jingtian Guan, Ji Li, Juntong Xi,Robust Computation of Trifocal Tensor Based on Hybrid Particle Swarm Optimization,Association for Computing Machinery,35–41
-Jingtian Guan, Ji Li, Xiao Yang, Xiaobo Chen, Juntong Xi,An improved geometrical calibration method for stereo deflectometry by using speckle pattern,Optics Communications,Volume 505
-Yukun Wang, Fan Ye, Ji Li, Xiaobo Chen, Juntong Xi, and Xiaojin Xu,Underwater fuel assembly deformation measurement with multisensor dual-line structured light,Applied Optics,60(31): 9624-9633
-Ji Li, Jingtian Guan, Yukun Wang, Xiaobo Chen, and Juntong Xi,Accurate estimation of camera response function for high dynamic range measurement,Applied Optics,61(1): 167-176
-赵超奇、习俊通,船舶小组立焊接工位特征提取和检测,组合机床与自动化加工技术,8: 76-80
-朱帅臣、习俊通,大型船舶平直板零件尺寸柔性测量方法,应用激光,41(5): 1070-1076
-郭阿敏、习俊通、于津伟,基于示教和视觉校正的机器人自适应去毛刺系统,组合机床与自动化加工技术,11: 91-95
-Junhui Mei,Xiao Yang,Zhenxin Wang,Xiaobo Chen, Juntong Xi,A Topology-Based Stereo Matching Method for One Shot 3D Measurement Using Coded Spot-Array Structured Light,Sensors,21(19):6444
-Xiao Yang, Xiaobo Chen, Juntong Xi,Error suppression for speckle correlation-based 3D shape measurement via dynamic shape function selection,Optics Communications,508:17584
-Xiao Yang, Juntong Xi,Jingyu Liu,Xiaobo Chen,Infrared Laser Speckle Projection-Based Multi-Sensor Collaborative Human Body Automatic Scanning System,machines,9(11), 299
- Wang, Zhenxing, Zhuoqi Wu, Xijin Zhen, Rundang Yang, and Juntong Xi. "An onsite structure parameters calibration of large FOV binocular stereovision based on small-size 2D target." Optik-International Journal for Light and Electron Optics 124, no. 21 (2013): 5164-5169.
- Wang, Zhenxing, Zhuoqi Wu, Xijin Zhen, Rundang Yang, and Juntong Xi. "Iteration-based direct ellipse-specific algebraic fitting method of incomplete spots for onsite three-dimensional measurement." Optical Engineering 54, no. 1 (2015): 013109-013109.
- Wang, Zhenxing, Zhuoqi Wu, Xijin Zhen, Rundang Yang, and Juntong Xi. "An onsite inspection sensor for the formation of hull plates based on active binocular stereovision." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (2014): 0954405414545388.
- Wang, Zhenxing, et al. "A two-step calibration method of a large FOV binocular stereovision sensor for onsite measurement." Measurement 62 (2015): 15-24.
- Zhang, Jinkai, Xiaobo Chen, Juntong Xi, and Zhuoqi Wu. "Aberration correction of double-sided telecentric zoom lenses using lens modules." Applied optics 53, no. 27 (2014): 6123-6132.
- Zhang, Jinkai, Xiaobo Chen, Juntong Xi, and Zhuoqi Wu. "Paraxial analysis of double-sided telecentric zoom lenses with three components." Applied optics53, no. 22 (2014): 4957-4967.
- Zhang, Jinkai, Xiaobo Chen, Juntong Xi, and Zhuoqi Wu. "Aberration design of zoom lens systems using thick lens modules." Applied optics 53, no. 36 (2014): 8424-8435.
- Zhang, Jinkai, Xiaobo Chen, Juntong Xi, and Zhuoqi Wu. "Paraxial analysis of double-sided telecentric zoom lenses with four components." Optical Engineering 53, no. 11 (2014): 115103-115103.
- Sun, Jin, Juntong Xi, Xiaobo Chen, and Yaoyang Xiong. "A CAD/CAM system for fabrication of facial prostheses." Rapid Prototyping Journal 17, no. 4 (2011): 253-261.
- Sun, Jin, Xiaobo Chen, Haihong Liao, and Juntong Xi. "Template-based framework for nasal prosthesis fabrication." Rapid Prototyping Journal 19, no. 2 (2013): 68-76
- Jin Sun, Xiaobo Chen, Xiaoyong Lu, Juntong Xi, Research on 3D Textured Dress Geometry Modeling, International Journal of Clothing Science and Technology, 2012, 24(2/3)
- Jin Sun, Xiaobo Chen, Xiaoyong Lu, Juntong Xi, Multiview Registration of Surfaces Minimizing Error Propagation, Advanced Materials Research, 2011, V271-273, 171-176
- Jin Sun, Xiaobo Chen, Juntong Xi, Integration of Precise Mid-facial Plane Model with Realistic Visualization Techniques for Developing Ocular Prostheses, GESTS International Transactions on Computer Science and Engineering, 2010, 60(1), 91-101
- Sun, Jin, Xiaobo Chen, and Juntong Xi. "Triangular mesh generation for a real-structure scan data in 3D space." In Measuring Technology and Mechatronics Automation (ICMTMA), 2011 Third International Conference on, vol. 3, pp. 1056-1059. IEEE, 2011.
- Sun, Jin, Yaoyang Xiong, Xiaobo Chen, and Juntong Xi. "Imperfect symmetry transform for orbital prosthesis modelling." Rapid Prototyping Journal 19, no. 3 (2013): 180-188
- Chen Xiaobo, Xi Juntong, Ye Jin, Phase error compensation method using smoothing spline approximation for a three-dimensional shape measurement system based on gray-code and phase-shift light projection, Optical Engineering, 2008, 47(11) , 113601. SCI
-Xiaobo Chen, Juntong Xi, Tao Jiang and Ye Jin, "Research and development of an accurate 3D shape measurement system based on fringe projection: Model analysis and performance evaluation," Precision Engineering, Volume 32, Issue 3, July 2008, Pages 215-221. SCI
- Chen Xiaobo, Xi Juntong, Ye Jin, et al., Accurate calibration for a camera-projector measurement system based on structured light projection, Optics and Lasers in Engineering, 2009, 47(3-4), 310-319. SCI
- Xiaobo Chen, Juntong Xi, Ye Jin and Bo Xu, "Accuracy improvement for 3D shape measurement system based on gray-code and phase-shift structured light projection," In Proceedings of SPIE, MIPPR 2007: Pattern Recognition and Computer Vision, Volume 6788, 67882C1-9 (2007). SCI
- Shengyong Cai, Juntong Xi, A control approach for pore size distribution in the bone scaffold based on the hexahedral mesh refinement, Computer-Aided Design, 2008, V40(10-11), 1040-1050. SCI
- Shengyong Cai, Juntong Xi, Morphology-controllable modeling approach for a porous scaffold structure in tissue engineering, Virtual and Physical Prototyping, 2009, v4 (3),149-163. EI
- J.T. Xi, X. Hu,Shape Analysis and parameterized modeling of hip joint. ASME Trans.Journal of Computing and Information Science in Engineering, 2003, 3(3): 260-265. SCI/EI
- Jiang Tao,Xi Juntong,An accurate three-dimensional scanning system with a new phase error compensation method. The International Journal of Advanced Manufacturing Technology, 2006, 29(11-12): 1178-1185. SCI
- Zhang Xuechang, Xi Jutong, A methodology for smoothing of point cloud data based on anisotropic heat conduction theoryThe International Journal of Advanced Manufacturing Technology, 2006, 30(1-2): 70-75 SCI
- Zhou Manyuan, Xi Juntong ,Method of integrating functionally gradient material information based on STEP ,Proceedings of the 5th ICFDM ,2002.8, EI收录
- Zhou Manyuan, Xi Juntong,Adaptive direct slicing with non-uniform cusp heights for rapid prototyping,International Journal of Advanced Manufacturing Technology,2004,23(1):20-27. SCI/Ei收录
- Zhou Manyuan, Xi Juntong,Modeling and processing of functionally graded materials for rapid prototyping , Journal of Materials Processing Technology , 2004,146(3):396-402. SCI/Ei收录
- Wang, Tian-Ming; Xi, Jun-Tong; Jin, Ye, A model research for prototype warp deformation in the FDM process, International Journal of Advanced Manufacturing Technology, 2007, 33(11-12):1087-1096 SCI/Ei收录
- Wang Tianming, Xi Juntong, The study of prototype surface micro-precision in fused deposition modeling process, Chinese Journal of Mechanical Engineering. 2007,20(1):100-106 Ei 收录
-Lu Fang-mei1, XI Jun-tong, MA Deng-zhe. Surface Reconstruction of Scanned Human Body Using Radial Basis Functions and Adaptive Partition of Unity. Journal of Shanghai Jiaotong University(Science), 2009, 14(3): 261-265
-蔡升勇,习俊通。基于形函数控制的组织工程骨架孔隙结构实体建模方法。机械工程学报,2009,45(7):297-304
- 张学昌,习俊通,严隽琪. 基于扩展高斯球的点云数据与CAD 模型配准. 机 械 工 程 学 报, 2007, 43(.)6:142-149
-张学昌,习俊通、严隽琪,基于非均匀热传导理论的点云数据平滑处理,机械工程学报, 2006,42(2),115-118。EI收录
- 张学昌,习俊通、严隽琪,基于光线测试的点云数据与CAD模型归属处理研究,计算机集成制造系统,2006,12(4),499-503。EI收录
- 张学昌,习俊通、严隽琪,基于遗传算法的点云数据与CAD模型坐标归一化研究,系统仿真学报,2006,18(9)2497-2500。EI收录
- 姜涛, 习俊通, 严隽琪. 非接触三维测量全场结构关系模型分析及系统开发,光学技术,2006,32(2):243-247。EI收录
- 樊强, 陈大为,习俊通. 高精度激光点扫描三维测量系统及应用,开云网页登录
学报,2006,40(2):227-230。EI收录
- 姜涛, 习俊通, 严隽琪. 非接触三维测量全场结构关系模型分析及系统开发,光学技术学报,2006,32(2):243-247。EI收录
- 姜涛,习俊通,严隽琪. 一种光学三维测量中的相位计算及补偿方法.机械工程学报,2005,41(3):201-205. EI收录
- 姜涛,习俊通,严隽琪. 反求工程中融合特征捕捉的光学三维测量方法.光电工程,2005,32(2):19-22。EI收录
- 黄任飞,习俊通.一种摄像机自动标定方法的设计与实现,测试技术学报,2004,18(2):122-127。EI收录
- 张学昌 习俊通 严隽琪. 基于点云数据的复杂型面数字化检测技术研究. 计算机集成制造系统,2005,11(5):727-733。EI收录
- 习俊通,周满圆,一种基于STEP的CAD模型直接分层方法, 计算机集成制造系统-CIMS, 2005,11(9):1243-1247 EI收录
- 周满圆,习俊通,基于STEP的多功能梯度材料信息融合方法研究 ,开云网页登录
学报,2003,37(1):17-20。EI收录
- 王天明,习俊通,金烨,熔融堆积成形中原型翘曲变形的研究,机械工程学报,2006, 42(3) :233-38. Ei收录
- 王天明,习俊通,金烨,颗粒体进料的微型螺旋挤压堆积喷头的设计,机械工程学报,2006, 42( 9):182-188 Ei收录