代表性论文专著
2021年度:
[1] Wu H, Yao Z. Force modeling for 2D freeform grinding with infinitesimal method [J]. Journal of Manufacturing Processes, 2021, 70(108-20).
[2] Luo G, Yao Z. Decoupling tests on axial heat-transfer in highly turbulent Taylor-Couette flow using thermal waves [J]. Experimental Thermal and Fluid Science, 2021, 128 (110439)
2020年度:
[1] Wang Shengde, Yao Zhenqiang, Shen Hong. Flow Resistance Modeling for Coolant Distribution within Canned Motor Cooling Loops[J]. Chinese Journal of Mechanical Engineering, 2020, 33(1): 1-11.
2019年度:
[1] Luo, G., Yao, Z., Shen, H. Mechanism of pressure oscillation in Taylor-Couette-Poiseuille flow with abruptly contracting and expanding annular gap, Physics of Fluids 31(7),075105, 2019 [封面论文]
[2] Song, J., Shen, H., Yao Z. A new Strategy for Laser Trepanning of Tapered Microholes, Journal of Micro and Nano Manufacturing Vol.7,031005, Sept. 2019
[3] Guohu Luo, Zhenqiang Yao, Shengde Wang, et al. the highly turbulent flow and radial heat transfer characters in semi-closed rotating disk cavity, ASME International Mechanical Engineering Congress & Exposition. v007t09a035-imece2016-66656, 2019.
2018年度:
[1] Xu, S. Yao, Z., He, J., Xu, J., Grinding Characteristics, Material Removal, and Damage Formation Mechanisms of Zirconia Ceramics in Hybrid Laser/Grinding, Journal of Manufacturing Science and Engineering, Transactions of the ASME, Volume 140, Issue 7, 1 July 2018.
[2] Luo, G., Yao, Z., Shen, H., A new hybrid turbulence model applied to highly turbulent Taylor-Couette flow, Physics of Fluids, Volume 30, Issue 6, 1 June 2018.
[3] Wang Shengde, Yao Zhenqiang, Shen Hong, et al. Numerical Analysis on the Hydraulic Performance of the Auxiliary Impeller in Large Capacity Canned-Motor Pump[C]. ASME International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018, 52101: V007T09A051.
2017年度:
[1] Xu, S., Yao, Z., Cai, H., Wang, H., An experimental investigation of grinding force and energy in laser thermal shock-assisted grinding of zirconia ceramics, International Journal of Advanced Manufacturing Technology,Volume 91, Issue 9-12, 1 August 2017, Pages 3299-3306.
[2] Xue, Y., Yao, Z., Cheng,D., Experimental Study on Momentum Transfer of Surface Texture in Taylor-Couette Flow, Chinese Journal of Mechanical Engineering (English Edition),Volume 30, Issue 3, 1 May 2017, Pages 754-761.
2016年度:
[1] Xu, S., Yao, Z., Zhang, M., Material removal behavior in scratching of zirconia ceramic surface treated with laser thermal shock, International Journal of Advanced Manufacturing Technology, Volume 85, Issue 9-12, 1 August 2016, Pages 2693-2701.
[2] Zhang,M., Yao,Z., Grinding performance in crankshaft pin journal path-controlled grinding of 40Cr using CBN wheel, International Journal of Advanced Manufacturing Technology, Volume 82, Issue 9-12, 1 February 2016, Pages 1581-1586。
[3] Cheng,D., Yao,Z.-Q., Xue,Y.-B.,Dynamic effect of annular flow with finite axial length on the rotor, Journal of Vibroengineering,Volume 18, Issue 1, 2016, Pages 56-69
2015年度:
[1] Zhang,M., Yao,Z., Force characteristics in continuous path controlled crankpin grinding, Chinese Journal of Mechanical Engineering (English Edition),Volume 28, Issue 2, 12 March 2015, Pages 331-337.
[2] Zhang,M., Yao,Z., Xu,S., Optimization of roughness and residual stresses in path controlled, grinding of crankpin, Procedia CIRP,Volume 36, 2015, Pages 117-122
2014年度:
[1] Zhang,P., Yao,Z., Du,Z., Global performance index system for kinematic optimization of robotic mechanism, Journal of Mechanical Design, Transactions of the ASME,Volume 136, Issue 3, March 2014.
[2] Li,K., Yao,Z., Hu,Y., Gu,W., Friction and wear performance of laser peen textured surface under starved lubrication, Tribology International,Volume 77, September 2014, Pages 97-105.
2013年度:
[1]Zhen-Qiang Yao, Xin-Guang Liang, Lei Luo, Jun Hu. A Chatter Free Calibration Method for Determining Cutter Runout and Cutting Force Coefficients in Ball-End Milling. Journal of Materials Processing Technology. 2013.213(9):1575-1587
[2]Xin-Guang Liang, Zhen-Qiang Yao, Lei Luo, Jun Hu. An Improved Numerical Integration Method for Predicting Milling Stability with Varying Time Delay. International Journal of Advanced Manufacturing Technology.2013.68(9-12):1967-1976
[3]Zhang P, Yao Z, Du Z. Impedance Analysis of Forging Process and Strategy Study on Compliance for Forging Manipulator. Chinese Journal of Mechanical Engineering 2013; 26(04):651-658
[4]Manchao Zhang, Zhenqiang Yao, Investigation of Surface Integrity in Path Controlled Grinding of Crankshaft Pin ,Applied Mechanics and Materials, 2013. 404:100-105
[5]Ni Weihua, Yao Zhenqiang,Integrating cylindricity error into tolerance analysis of precision rotary assemblies using Jacobian-Torsor model, Journal of Mechanical Engineering Science, 2013,227(11): 2517-2530
[6]Ya-Bo Xue, Zhen-Qiang Yao, Cang-Xue Li. Structural drag reduction in Taylor-Couette flow. Applied Mechanics and Materials, 2013,300-301:285-289
[7]Kangmei Li, Yongxiang Hu and Zhenqiang Yao. Experimental Study of Micro Dimple Fabrication Based on Laser Shock Processing. Optics & Laser Technology. 2013(48): 216–225.
[8]姚振强,胡永祥,基于短脉冲激光束干涉的硅表面亚微米结构加工工艺[J], 机械工程学报, 2013, 49(6): 122-128
[9]梁鑫光,姚振强. 基于动力学响应的球头刀五轴铣削表面形貌仿真[J], 机械工程学报, 2013, 49(6): 171-178
2012年度:
[1]Zhenqiang Yao, Weibin Gu, Kangmei Li. Relationship between surface roughness and subsurface crack depth during grinding of optical glass BK7, Journal of Materials Processing Technology, 2012, V212(4): 969-976.
[2]Ni Weihua, Yao Zhenqiang, Cylindricity modeling and tolerance analysis for cylindrical components, International Journal of Advanced Manufacturing Technology, 2012, DOI 10.1007/s00170-012-4078-3
[3]Dayong Hu, Zhenqiang Yao. Stacker-reclaimer scheduling in a dry bulk terminal[J]. International Journal of Computer Integrated Manufacturing. 2012, V25(11): 1047-1058.
[4]Kangmei Li, Yongxiang Hu and Zhenqiang Yao. Micro Dimple Fabrication on OFHC Copper by Laser Shock Processing[J]. Applied Mechanics and Materials. 2012, V217-219: 2246-2251.
[5]Shuo Zhang,Ruihang Shi,Xinguang Liang,Yongxiang Hu,Zhenqiang Yao. The Effect of Axial Cutting Edge Inclination Angle on the Axial Milling Force of Helical Milling[J]. Applied Mechanics and Materials. 2012, V217-219: 1723-1728.
[6]Yuan Li,Yongxiang Hu,Zhenqiang Yao.Modeling and Analysis of the Effect of Preloaded Pressing Force on Gap Formation during the Drilling of Double-Layered Material[J]. Applied Mechanics and Materials. 2012, V217-219: 1541-1546.
2011年度:
[1]Xin-Guang Liang, Zhen-Qiang Yao.,An accuracy algorithm for chip thickness modeling in 5-axis ball-end finish milling, Computer-Aided Design ,43 (2011):971–978
[2]Weibin Gu, Zhenqiang Yao, Xinguang Liang,Material removal of optical glass BK7 during single and double scratch tests,Wear,2011,270(3-4):241-246.
[3]Weibin Gu, Zhenqiang Yao, Haolin Li,Investigation of grinding modes in horizontal surface grinding of optical glass BK7,Journal of Materials Processing Technology,2011,210(10):1629-1636.
[4]Weibin Gu, Zhenqiang Yao,Evaluation of surface cracking in micron and sub-micron scale scratch tests of optical glass BK7,Journal of Mechanical Science and Technology,2011,25(5):1253-1260.
[5]Jian WANG, Zhen-qiang YAO, Quan-zhang AN, et al.,RIDED-2D: a rule-based instantaneous denoising and edge detection method for 2D range scan line,International Journal of Pattern Recognition and Artificial Intelligence,2011. 25(6): 807-833.
[6]Jian WANG, Zhen-qiang YAO, Lin MEI, et al.,Rapid large noise denoising for scan lines in range images,Proceedings of 2011 4th IEEE International Conference on Computer Science and Information Technology.Chengdu, 2011 (7): 388-392.
[7]Jian WANG, Zhen-qiang YAO, Ming-de YIN, et al. ,Principles and applications of RIDED-2D: A Robust Edge Detection Method in Range Images,Pattern Recognition, Machine Intelligence and Biometrics, Patrick S. P. Wang, ed: Springer.ISBN: 978-3-642-22406-5. 2011: 139-167
[8]胡大勇; 姚振强,调整时间与顺序相关的等同并行机调度,机械工程学报,2011, 47(16): 160-165.
其它年份:
[1]ZQ Yao, H Shen, YJ Shi, J Hu. Numerical study on laser forming of metal plates with pre-loads. Computational Materials Science, 2007, 40(1): 27-32.
[2]YM Tao, ZQ Yao, LQ Liu, Y Xie. Precision metrology of micro-workpieces on their tribological performance with an error compensation method. Journal of Materials Processing Technology, 2002, 129(1-3): 227-231.
[3]ZQ Yao, Q Zhang, YM Tao, XP Zhang. A new approach to measure the friction coefficient of micro journal bearings. Tribology International, 2000, 33(7): 485-489.
专著:
1、姚振强、张雪萍,《敏捷制造》,机械工业出版社,2004年,8月。ISBN:711114628X
2、王成焘、姚振强,《汽车摩擦学》,国家“十五”重点图书,开云网页登录
出版社,2002年12月。ISBN:7533715942
3、孙祖和、姚振强,普通高等教育“十五”国家级规划教材《CAD/CAM与数控加工应用实践教程》,机械工业出版社, 2006年6月。
ISBN:7111190947
软件版权登记及专利
软件版权登记:
[1]姚振强,张满朝,等.至强参数化精密非圆磨削系统,开云网页登录
,2011SR009304,2010-08-10
[2]姚振强,冰峰,等.柔性导轨自动制孔设备人机界面,开云网页登录
,2011R11S05980,2011-07-18
[3]姚振强, 王建, 胡俊, 等. 激光雷达三维检测与识别系统 (LMRS),v3.02.开云网页登录
,2010SR002362. 2010-01-14.
[4]姚振强, 王建, 胡俊, 等. 激光雷达测量与分析系统 (LMAS),v2.09.开云网页登录
,2009SR039116. 2009-09-14.
[5]姚振强, 王建. 双电子罗盘实时姿态校准系统 (DCCRCS) v2.04.开云网页登录
,2009SR058511. 2009-12-17.
授权发明专利:
2020年获授权发明专利5项:
[1] 姚振强;王升德;金智毅;罗国虎;徐正松;沈洪, 主泵屏蔽电机辅助叶轮流量测量装置与回路分流测算方法, ZL201910466044.6
[2] 姚振强;罗国虎;金智毅;王升德;沈洪, 基于间隙环流阻力特性的屏蔽电机主泵飞轮结构优化方法, ZL201710084443.7
[3] 姚振强,胡永祥,沈洪,钱超, 轴承组预紧状态评估方法及内孔转矩测量连接器, ZL.201910636425.4
[4] 姚振强;胡永祥;沈洪;钱超, 轴承组预紧状态评估方法, ZL201910636425.4
[5] 姚振强,樊启泰,段子誉,刘光远,装配用轴承有效预紧载荷测量方法, CN201910305867.0
2019年获授权发明专利7项:
[1] 姚振强;张满朝;王洪雨;许胜, 曲轴连杆颈随动磨削温度测量装置, ZL201610116041.6
[2] 姚振强;胡永祥;宋尧, 控制叠层板钻孔层间毛刺的压紧力调整方法, ZL201610236333.3
[3] 姚振强;王洪雨;张满朝;许胜, 曲轴连杆颈随动磨削力动态测量方法, ZL201610298350.X
[4] 姚振强;罗国虎;王升德;金智毅;沈洪, 屏蔽电机飞轮罐状间隙腔室阻力转矩解耦测试装置及方法,ZL201710084456.4
[5] 姚振强;罗国虎;王升德;沈洪;薛亚波;成德,轴向压力流与周向剪切流交互影响彼此间隙流动阻力的测试装置及方法,ZL201610200454.2
[6] 姚振强;张磊华;罗国虎;王升德;沈洪,环形流道转动下的摩擦因子修正方法,ZL201610146207.9
[7] 姚振强;罗国虎;王升德;沈洪;薛亚波;成德,带回流孔盘面间隙环流径向压力流阻及非对称轴向力测试装置及方法, ZL201610139666.4
2018年授权发明专利5项:
[1] 姚振强; 王升德; 罗国虎; 沈洪, 屏蔽式核主泵冷却系统的温度分布测定方法, ZL201610091924.6
[2] 姚振强; 罗国虎; 王升德; 沈洪; 薛亚波; 成德, 泰勒库特流轴向传热测试装置及其测试方法, ZL201610039852.0
[3] 姚振强; 孙姚飞; 杨家荣; 张冏; 王世松; 王洪雨; 徐正松, 基于轮廓测量的板件角焊缝打磨数控机床及加工方法, ZL201510512716.4
[4] 胡永祥; 姚振强; 李志; 罗明生, 用于确定复杂曲面形状工件激光喷丸成形工艺参数的方法, ZL201510102659.2
[5] 张雪萍; 孟琦; 姚振强; 金隼, 一种具备非圆异型孔加工功能的珩磨刀具装置, ZL201510527824.9
2017年授权发明专利5项:
[1] 姚振强; 薛亚波; 成德; 徐正松; 沈洪; 王升德; 张磊华, 一种飞轮间隙流体非对称水动力学轴向力快速调整装置, ZL201410334690.4
[2] 姚振强; 王升德; 张磊华; 薛亚波; 成德; 徐正松; 沈洪, 一种立式转子动态径向加载机构及稳定性测试方案, ZL201410419446.8
[3] 张雪萍; 姚振强; 王晓骎, 一种具备形状偏差补偿功能的分段进给珩磨头装置, ZL201410562918.5
[4] 胡永祥; 余雄超; 姚振强; 李志, 一种用于大型工件激光喷丸成形的光路装置及方法, ZL201510197097.4
[5] 姚振强; 王升德; 徐正松; 张冏; 孙姚飞; 许胜; 张满朝, 用于回转加工的多参数信号采集装置, ZL201410775415.6
2016年授权发明专利3项:
[1] 姚振强; 汪学栋; 许胜; 孙姚飞; 张满潮; 王雨诗, 曲轴加工过程中主轴颈空间位置测量的极坐标方法及装置, ZL201410001995.3
[2] 姚振强; 王伟荣; 孙姚飞; 许胜; 林帷杰; 肖建军; 李康妹, 可换磨杆的螺母内螺纹磨削装置及其操作方法, ZL201310675628.7
[3] 姚振强; 薛亚波; 成德; 徐正松; 沈洪; 王升德; 张磊华, 屏蔽式电机立式湿转子流体动力学轴向力测试装置及方法, ZL201410148220.9
2015年授权发明专利6项:
[1] 姚振强; 薛亚波; 成德; 龚春鸣; 徐正松; 沈洪; 李梦启; 李藏雪; 吕向平, 屏蔽式电机转子系统水力损耗测试平台及测试方法, ZL201110243736.8
[2] 姚振强; 许胜; 沈洪; 徐正松, 可变载滚珠丝杠摩擦力测量装置及测试方法, ZL201310072319.0
[3] 姚振强; 王伟荣; 肖建军; 李康妹; 许胜; 孙姚飞, 磨床尾架顶尖套异形面模块化支撑结构及其使用方法, ZL201310376203.6
[4] 姚振强; 沈洪; 徐正松; 成德; 薛亚波, 屏蔽电机屏蔽套的间隙流场研究装置, ZL201210209616.0
[5] 姚振强; 徐正松; 胡永祥; 陈磊; 陈洁; 张洪州; 梁鑫光; 史瑞航, 螺旋铣孔装置, ZL201210153106.6
[6] 姚振强; 张雪萍; 高罗辉; 丁利强, 一种双进给式测量圆度及圆柱度的装置, ZL201210253837.8
2014年授权发明专利3项:
[1] 姚振强; 李康妹; 徐正松; 胡永祥, 一种适用于滑动摩擦磨损试验的万向自适应夹具, ZL201210462355.3
[2] 张雪萍; 姚振强; 高罗辉; 赵玉祥, 一种理想圆柱孔珩磨头装置及其构造方法, ZL201210254221.2
[3] 姚振强; 徐正松; 许胜; 沈洪, 快速简便测量滚珠丝杠摩擦力的测量装置及测量方法, ZL201210513770.7
2013年授权发明专利3项:
[1]姚振强、胡永祥、张冉冉、徐晓霞、冰峰,“柔性导轨用导论装置”,ZL201110138160.9
[2]姚振强、徐正松、雷锋杰、梁鑫光、杨嘉、林观生等,“用于汽车发动机缸体端面加工的工艺装备定位压块”,ZL20111010795.0
[3]姚振强、胡永祥、徐晓霞、张冉冉、冰峰,“用于大曲率半径曲面法矢量快速检测方法”,ZL201110099364.6
[4]姚振强、徐正松、成德、薛亚波、龚春鸣、沈洪,一种核泵转子系统试验台及水箱密封装置,ZL201110231973.2
2012年授权发明专利3项:
[1]姚振强、王建华、胡永祥、张永康、韩叶飞等,“用于民用飞机环境控制系统功能试验的自动化装置”,ZL201010267867.5
[2]姚振强、张满朝、胡俊、张雪萍,“多边形基于恒磨出率变速非圆磨削方法”,ZL201010255458.3
[3]姚振强、胡永祥、冰峰、张冉冉、徐晓霞,“基于制孔设备坐标系确定的柔性导轨孔群加工方法”,ZL201110188880.6
2011年及以前授权发明专利10项:
[1]姚振强, 王建, 胡永祥等.基于射频识别的危险品物流智能监管方法: 中国, 2009103060094[P]. CN101650785. 2010
[2]姚振强, 王建, 胡永祥等. 基于射频识别的危险品物流智能监管系统及方法: 中国, ZL 200810035543.1[P]. 2010.
[3]姚振强, 徐正松, 胡俊, 姚俊, 陈锐, 张雪萍, 丁逵. 用于凸轮轴共轭砂带磨削的共轭轮减摩机构. 200610116276.1, 2008
[4]姚振强, 杜正春, 胡永祥, 赵海英. 自动化无人堆场吊具-集卡对箱的分级快速定位方法.200510030437.0, 2007
[5]姚振强, 杜正春, 赵海英, 胡永祥. 用于集装箱堆场的框式防风结构.200510110217.9, 2007
[6]姚振强, 胡永祥, 徐正松, 刘龙权, 吴建华. 橡胶件型面切口冲切加工组合刀具系统.200410068041.0, 2006
[7]姚振强, 胡永祥, 徐正松. 橡胶密封条型面切口冲切加工装置. 200510024281.5, 2007
[8]姚振强, 刘刚, 刘龙权, 张雪萍. 多工位加工系统无干涉精密定位机构. 03116155.3, 2005
[9]姚振强, 袁光杰. 管螺纹接头内外螺纹表面接触状态分布的测试方法.03116157.X, 2005
[10]姚振强, 张琦. 微型轴承摩擦系数测试方法与装置.00111711.4, 2003